Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in Rye: What to Know First

Olympia Chimney cap and crown work in Rye typically runs $350 to $900 for a standard single-flue cap replacement with crown sealing, and most jobs are booked within a week, not a season. We’re an independent Olympia Chimney service provider, which means we work on their products every week but we don’t answer to them. If you’ve got an Olympia cap that’s rusted through, a crown that’s spalling, or a flue that’s suddenly drafting poorly, call (914) 685-6096 and Wendell or one of the crew will tell you straight whether it’s urgent or can wait. This page is for Rye homeowners who own Olympia Chimney products and want to know what actually goes wrong with them, what it costs to fix, and whether the guy on the phone knows the difference between a crown crack and a cosmetic hairline.

Call (914) 685-6096

How Olympia Chimney Products Fail - and How We Fix Them

Olympia makes solid equipment. But every brand has its weak points, and after 29 years of looking at chimneys in Rye’s older housing stock, we know where these ones give out first. Here’s what we see most often:

• Olympia Legacy Series caps and rust at the screen seam. The mesh screen on the Legacy line is sturdy, but the seam where it meets the cap body starts rusting first, especially on homes within a half mile of Milton Harbor where salt air sits on the metal. Once that seam goes, the screen sags inward and birds find their way in. We replace the cap with an OEM Olympia part or a heavier aftermarket option if the homeowner wants something that’ll outlast the original.
• Olympia stainless flue caps and the wrong-anchor problem. On the stainless caps Olympia sells for their rigid liner systems, we often see caps that were anchored with self-tapping screws into the flue tile rather than a proper top plate. The cap holds fine for two or three winters, then Rye’s freeze-thaw cycles work the screws loose and the cap starts rattling in the wind. The fix is a properly sized top plate and a cap that seats onto it, not into it.
• Pre-cast Olympia crowns and hairline cracking. Homes built in Rye in the 1980s and early 1990s that used Olympia’s pre-cast crown forms have a pattern we know well: the crown was poured over the flue tile without an expansion joint, so the tile heats up, pushes against the crown, and over a decade or two the crown fractures at the corners first. Water gets in those cracks and freezes. We cut back the old crown, install a proper expansion joint, and repour or coat it depending on how far gone it is.
• Olympia multi-flue caps and the sagging center bracket. On wide Rye chimneys with two or three flues, the Olympia multi-flue caps hold up just fine on the ends but the center support bracket bends after a few heavy snow seasons. The cap still looks good from the ground, but up close it dips in the middle and water pools instead of running off. We straighten, reinforce, or upgrade the bracket and reseal the cap-to-crown joint.
• Crown coating failure on Olympia chase covers. For prefab or chase-style installations using Olympia chase covers, the factory powder coat starts peeling at the folded corners within five to seven years in this climate. Once bare metal shows, the cover rusts from the corner inward. We remove the old cover, assess the flue, and install a properly sealed replacement with a heavier coating than the original spec.

Our Olympia Chimney Chimney Cap & Crown Process

Here’s how a typical Olympia cap or crown job goes when we’re on it:

1. 1
   Call and talk to a person. You call (914) 685-6096, a live human answers, and we ask what you’re seeing: rust, leaking, draft problems, animal noise. We quote you a range before we ever leave the shop.
2. 2
   Roof-level inspection. Wendell or a crew member gets up on the Rye roof, removes the existing cap if there is one, and checks the flue tile, the crown, and the mortar joints. You get photos of everything we find.
3. 3
   Plain-English diagnosis. We tell you what’s broken, what it costs to fix, and whether it can wait. If the flue’s clear and the cap’s solid, we’ll tell you that too. We’ve told plenty of Rye homeowners to save their money for another year.
4. 4
   Parts decision. If a cap needs replacement, we talk OEM Olympia versus quality aftermarket. Olympia parts keep the warranty picture clean. Aftermarket can make sense when you want a heavier gauge metal or a custom fit for an unusual flue size. We lay out both prices and let you decide.
5. 5
   The work. We do the repair, the coating, or the replacement, and we seal every joint properly. Crown work includes curing time, so we don’t rush that step.
6. 6
   Test and document. We run a draft check and hand you the photos and the invoice. Every job carries our 90-Day Done Right Promise in writing: if it isn’t right, one call brings us back at no charge.

What Olympia Chimney Chimney Cap & Crown Costs in Rye

Here are honest numbers based on what we’ve charged on Olympia jobs in Rye over the past few years. Every chimney is different, so these are ranges, not quotes:

• Standard Olympia single-flue cap replacement: $350 to $550 installed, depending on flue size and access.
• Multi-flue Olympia cap installation: $550 to $850 for most Rye two and three-flue chimneys.
• Crown repair (small cracks, sealing): $250 to $450.
• Full crown repour with expansion joint: $700 to $1,100, depending on access and flue configuration.
• Chase cover replacement (prefab chimneys): $500 to $800 for a properly fabricated cover.

What moves the price: roof pitch, chimney height, whether the old cap needs cutting off, and whether we find flue tile damage once the cap is off. We quote upfront before any tool comes off the truck, and the number we give on the phone is the number on the invoice. Call (914) 685-6096 and we’ll come out for a free estimate, no trip charge if you’re inside our service county.

Why Rye Homeowners Call Top Hat Chimney for Olympia Chimney Work

We’ve been working in Rye since 1999, which means we’ve seen Olympia products installed, replaced, patched, and replaced again. Wendell Pike started this outfit and still runs it, and his name goes on every job sheet. That matters more than it used to. You aren’t getting a rotating cast of subcontractors; you’re getting the same crew that did the chimney two streets over, the same faces at the permit office, and the same phone number answered by a live person at 2 a.m. if a storm blows your cap off. Every Olympia cap and crown job we do carries our 90-Day Done Right Promise in writing. And if an Olympia part isn’t the right call, we work with DuraFlex, HeatShield, Gelco, Famco, and Copperfield too, so we aren’t locked into one brand’s parts list. Ask anyone on your street. Ask the neighbor with the colonial near Milton Point.

FAQs